Online UPS
MF Series
1-phase input – 1-phase output6 kVA – 10 kVA
The MF Series (6–10 kVA) is the higher-power range of the single-phase input, single-phase output MF online UPS family, with a pure sine wave output and advanced communication options.
Built on high-frequency true double conversion, it protects medical systems, security and automation systems, computer networks and communication infrastructure against power cuts and energy fluctuations, keeping them running without interruption.
- Uninterrupted, stable power
- High protection for critical loads
- Continuous sine wave output
Product Features
- High-frequency true double conversion
- DSP (Digital Signal Processor) technology
- Input power factor correction (PFC)
- Wide input voltage range (110~300 V)
- Remaining battery runtime display
- LED indicator that changes colour with the operating mode
- Output power factor = 0.9
- Cold start (start from battery without mains)
- Automatic frequency detection
- Frequency converter mode
- ECO mode for high energy savings
- Output voltage selectable on the LCD display
- Self-test at start-up
- Advanced battery management (ABM)
- Short-circuit and overload protection
- Automatic battery charging while switched off
- Load-sensing intelligent fan control
- Excellent generator compatibility
- Standard RS232 / USB
- Standard emergency power off function (EPO)
- SNMP / AS400 / Modbus (optional)
- Expandable battery unit with an additional charger card (optional)
- Parallel operation of up to 3 units (optional)
- Electromagnetic compatibility, EMC – LVD CE certificates
- 2-year warranty / 10-year spare parts warranty
| MODEL | MF-6 | MF-10 |
|---|---|---|
| POWER | 6.000 VA / 5.400 W | 10.000 / 9.000 W |
| MODEL | MF-6 | MF-10 |
|---|---|---|
| Voltage | 208 / 220 / 230 / 240 Vac | |
| Voltage range | At 100% load (185 – 275) ± 5 Vac / at 50% load (120 – 185) ± 5 Vac | |
| Frequency | 50 / 60 Hz | |
| Frequency range | 40-70 Hz ± %0,5 (46-54 Hz/56-64 Hz) | |
| Input power factor | ≥ 0,99 | |
| Bypass voltage range | 160 Vac – nominal output voltage ± 32 Vac | |
| MODEL | MF-6 | MF-10 |
|---|---|---|
| Voltage | 208 / 220 / 230 / 240 Vac – selectable on the LCD panel | |
| Voltage regulation | ± %1 | |
| Frequency | 50 / 60 Hz | |
| Waveform / output power factor | Pure sine wave / cosφ = 0.9 | |
| Crest factor | 3:1 | |
| Harmonic distortion THDv | ≤ 2% with linear load; ≤ 4% with non-linear load | |
| Transfer time | Mains to battery mode: 0 ms | |
| Overload capacity | 1 min at 105–125% load, 30 s at 125–150% load, 0.5 s at 150% load | |
| MODEL | MF-6 | MF-10 |
|---|---|---|
| Online operation | ≥ %94 | |
| ECO mode | ≥ %98 | |
| MODEL | MF-6 | MF-10 |
|---|---|---|
| Battery count / capacity | 15 × 7–9 Ah built-in | 16 × 7–9 Ah built-in |
| Battery charging current (standard model) | 1,2 Amp. | |
| Battery charging current (long-backup L model) | 4 Amp. | |
| Battery charging time | 90% capacity in 7 hours | |
| MODEL | MF-6 | MF-10 |
|---|---|---|
| Audible / LED alarms | Mains failure, low battery, overload, general UPS fault | |
| Display | LCD | |
| EPO emergency stop | Optional | |
| Communication | RS232 standard, SNMP – Modbus – AS400 card optional | |
| Parallel operation | 3 units (optional) | |
| Maintenance bypass | Optional | |
| Frequency converter mode | Yes (power derated by 60%) | |
| MODEL | MF-6 | MF-10 |
|---|---|---|
| Operating temperature | 0 ˚C- 40 ˚C | |
| Relative humidity | 20–90% (non-condensing) | |
| Protection class | IP20 | |
| Acoustic noise | ≤ 50 dB (at 1 m) | |
| Operating altitude | 0–3000 m (1% power loss per 100 m) | |
| MODEL | MF-6 | MF-10 |
|---|---|---|
| LVD :EN 62040-1, EMC: EN 62040-2, EN 61000-4-2,EN 61000-4-3, EN 61000-4-4, EN 61000-4-5 | ||
| MODEL | MF-6 | MF-10 |
|---|---|---|
| Dimensions (W×D×H) mm | 248 x 500 x 616 | |
| Net weight (kg) | 59 | 63 |
| Gross weight (kg) | 65 | 68 |
Other Online UPS Series
MFR Series
1-phase input – 1-phase output1 kVA – 3 kVA
TF-I Series
3-phase input – 3-phase output10 kVA – 250 kVA
TMF-I Series
3-phase input – 1-phase output10 kVA – 40 kVA
MF-I Series
1-phase input – 1-phase output6 kVA – 20 kVA
TMF Series
3-phase input – 1-phase output10 kVA – 20 kVA
TF Series
3-phase input – 3-phase output10 kVA – 200 kVA
TF-G Series
3-phase input – 3-phase output10 kVA – 600 kVA
MF Series
1-phase input – 1-phase output1 kVA – 3 kVA
Frequently Asked Questions
What should I consider when choosing a UPS?
The power of the load to be protected (VA/W), the required backup time, the input and output phase configuration, the installation environment and communication needs are assessed together. If you share your load details, we can help you choose the right model.
Which applications is the MF Series suitable for?
The MF Series (6–10 kVA) is the higher-power range of the single-phase input, single-phase output MF online UPS family, with a pure sine wave output and advanced communication options.
Is there technical documentation for the MF Series?
Yes. You can reach the product's technical specifications from the catalogue (PDF) on this page. The technical specifications table is also on the page.
How long is the warranty?
2-year warranty / 10-year spare parts warranty.