Online UPS
TMF Series
3-phase input – 1-phase output10 kVA – 20 kVA
The TMF Series (10–20 kVA) is an online UPS with three-phase input and single-phase output, so single-phase critical equipment can be protected where the mains supply is three-phase.
DSP-controlled, with PWM and IGBT technology and a full sine wave output, it is made for industrial production machines, hospital and imaging equipment, heavy industry, service providers, and data and communication centres.
- Uninterrupted, stable power
- High protection for critical loads
- Continuous sine wave output
Product Features
- DSP processor technology
- High-frequency double conversion technology
- PFC at the input
- Output power factor 0.9
- Selectable battery voltage: 192 / 240 Vdc
- End-of-discharge voltage selectable on the LCD (EOD)
- Operation as 3/1-phase or 1/1-phase
- Wide input voltage range: 110–300 Vac
- Start from battery (cold start)
- Zero transfer time
- Energy savings with ECO mode
- Intelligent battery management (ABM)
- Compatible operation with generators
- Battery charging while the UPS is off
- Automatically controlled fan speed
- Standard RS232 communication
- RS485 / SNMP / AS400 / USB communication outputs (optional)
- Emergency power off (EPO) (optional)
- Manual bypass (optional)
- N+1 parallel operation (optional)
- Additional batteries can be connected for longer backup (optional)
- Electromagnetic compatibility
| MODEL | TMF-10 | TMF-15 | TMF-20 | |
|---|---|---|---|---|
| POWER (VA) | 10.000 VA / 9.000 W | 15.000 VA / 13.500 W | 20.000 VA / 18.000 W | |
| MODEL | TMF-10 | TMF-15 | TMF-20 | |
|---|---|---|---|---|
| Voltage | 220/380 Vac 3-phase input / 1-phase output or 1-phase input / 1-phase output | |||
| Voltage range | 1-phase input: at 100% linear load (176–275) ± 5 Vac, at 50% linear load (120–176) ± 5 Vac | |||
| 3-phase input: at 100% linear load (304–476) ± 5 Vac, at 50% linear load (208–304) ± 5 Vac | ||||
| Frequency | 50/60 Hz. | |||
| Frequency range | 40 Hz–70 Hz / (45–55 Hz, 54–66 Hz at load > 60% and 1-phase input / 1-phase output) | |||
| Input power factor | 3-phase input ≥ 0.9 / 1-phase input ≥ 0.9 | |||
| Total harmonic distortion (THDi) | ≤ 2% with linear load / ≤ 4% with non-linear load | |||
| MODEL | TMF-10 | TMF-15 | TMF-20 | |
|---|---|---|---|---|
| Voltage | 220 / 230 / 240 Vac – adjustable on the LCD panel | |||
| Voltage regulation | ± %1 | |||
| Frequency | 50 / 60 Hz. | |||
| Waveform | Pure sine wave | |||
| Output PF | 0,9 | |||
| Crest factor | 3:1 | |||
| Total harmonic distortion (THDv) | ≤ 1% with linear load; ≤ 5% with non-linear load | |||
| Transfer time | 0 ms (online – battery mode) | |||
| Overload capacity | 100–105% continuous, 1 min at 105–125% load, 30 s at 125–150% load, 0.5 s above 150% | |||
| MODEL | TMF-10 | TMF-15 | TMF-20 | |
|---|---|---|---|---|
| Online mode | ≥ %94 | |||
| ECO mode | ≥ %98 | |||
| MODEL | TMF-10 | TMF-15 | TMF-20 | |
|---|---|---|---|---|
| Battery voltage | 192 Vdc. | 192 / 216 / 240 Vdc. | ||
| Battery count | 16 | 16 / 18 / 20 pcs, adjustable on the LCD panel | ||
| Battery charging current | 4 A | |||
| Battery charging time | Depends on battery capacity | |||
| MODEL | TMF-10 | TMF-15 | TMF-20 | |
|---|---|---|---|---|
| Display | LCD | |||
| RS232 | Yes | |||
| EPO (emergency power off) | Optional | |||
| Communication slot | Optional | |||
| Monitoring software | Winpower | |||
| Parallel operation | 3 A (optional) | |||
| Frequency converter mode | Yes (operates 1-phase input / 1-phase output, power derated by 60%) | |||
| Maintenance bypass | Optional | |||
| Accessories | EBM cable, RS232 cable, input cable, output cable | |||
| MODEL | TMF-10 | TMF-15 | TMF-20 | |
|---|---|---|---|---|
| Operating temperature | 0 ˚C- 40 ˚C | |||
| Relative humidity | 20–90% (non-condensing) | |||
| Acoustic noise | ≤ 60 dB (at 1 m) | |||
| Protection class | IP 20 | |||
| Operating altitude | 0–3000 m (1% power loss per 100 m) | |||
| MODEL | TMF-10 | TMF-15 | TMF-20 | |
|---|---|---|---|---|
| Compliant standards | EN 62040-1, EN 62040-1, EN 61000-4-2, EN 61000-4-3, EN 61000-4-3, EN 61000-4-5 | |||
| MODEL | TMF-10 | TMF-15 | TMF-20 | |
|---|---|---|---|---|
| Dimensions (W×D×H) mm | 212 x 500 x 420 | 248 x 500 x 565 | 248 x 500 x 616 | |
| Net / gross weight (kg) | 16,9; 20 | 31; 35 | ||
Other Online UPS Series
MFR Series
1-phase input – 1-phase output1 kVA – 3 kVA
MF Series
1-phase input – 1-phase output6 kVA – 10 kVA
TF-I Series
3-phase input – 3-phase output10 kVA – 250 kVA
TMF-I Series
3-phase input – 1-phase output10 kVA – 40 kVA
MF-I Series
1-phase input – 1-phase output6 kVA – 20 kVA
TF Series
3-phase input – 3-phase output10 kVA – 200 kVA
TF-G Series
3-phase input – 3-phase output10 kVA – 600 kVA
MF Series
1-phase input – 1-phase output1 kVA – 3 kVA
Frequently Asked Questions
What should I consider when choosing a UPS?
The power of the load to be protected (VA/W), the required backup time, the input and output phase configuration, the installation environment and communication needs are assessed together. If you share your load details, we can help you choose the right model.
Which applications is the TMF Series suitable for?
The TMF Series (10–20 kVA) is an online UPS with three-phase input and single-phase output, so single-phase critical equipment can be protected where the mains supply is three-phase.
Is there technical documentation for the TMF Series?
Yes. You can reach the product's technical specifications from the catalogue (PDF) on this page. The technical specifications table is also on the page.
How can I get a quote and technical support?
You can reach us through the form on our contact page or by phone. Let's define the right product and quote for your needs together.